DC-DC Buck Converter, 4-40VDC to 1.25-37VDC, 2A with LED display
SKU: 40400
Need a high quality power supply for your project? Here’s a very cool piece of kit. Feed up to 40V into this guy and get anything from 1.25 – 37VDC out, with up to 2A continuous (assuming your input has sufficient power)! Top it all off with a built-in voltage meter for easy adjustment.Notes:To adjust output voltage, adjust the multi-turn trim pot using a screw driver while measuring the output voltage on a voltmeter.To ensure that the voltage meter accuracy, please make sure that the input voltage is 4.5V or more.Voltmeter fine-tuning: hold down the Right button for 1-2 seconds and release to enter fine-tuning mode, then adjust voltage display up or down by pressing left or right buttons. Once configured, press and hold Right button for 1-2 seconds to exit fine tuning mode.The Voltage Meter can be turned off, for minimum power loss. To do so, press and release the left button until the display disappears.
Features:
- Specifications:
- Voltage Display of Vin and Vout
- Voltage accuracy: +-0.05V
- Input Voltage Range: 4.0 – 40V (must be 1.5V higher than Vout)
- Output Voltage Range: 1.25 – 37V
- Left switch: Voltage Display On/Off Switch
- Right Switch: Voltage Display toggle (in/out)
- Voltmeter Calibration
- Peak Current: 3A
- Nominal Current: 2A
- Maximum Power: 15W
- Size:6.1*3.4*12cm