- Designed to measure surface textures conforming to traceable standards
- Large LCD display indicates either roughness parameter Ra or Rz at the touch of a button, combines with the selected cut-off length
- External calibration of roughness values is possible via a special CAL button, simplifies adjustments, audible signal informs the user when each measurement is ready
- Easy-to-use TR100 operates on various surfaces, not only flat, but also outer cylinders, outer cones, grooves and recesses greater than 80 x 30mm
- Determines both roughness parameters, Ra and Rz within a wide measuring range
- Piezo electric pick up stylus with diamond tip assures a very reliable measurement within tolerances that conform to ISO class 3
- Roughness Parameter: Ra (ISO), Rz (DIN)
- Measuring Range: Ra: 0.05 to 10um; Rz: 0.1 to 50um
- Measuring Lengths: 0.05", 0.15", 0.2" / 1.25mm, 4.0mm, 5.0mm
- Cut-off Lengths: 0.009", 0.032", 0.09"/ 0.25mm, 0.8mm, 2.5mm
- Tracing Length: 0.24" / 6mm
- Tracing Speed: 0.039"/second , 1.00mm/second
- Power Supply: 2 x 3.6V NiMH batteries
- Dimensions: 4.9 x 2.87 x 1.023" / 125 x 73 x 26mm
- Weight: 7.06oz / 200g
|
|
|