MS14A : Motion Sensor

Security: X-10 Security

Motion Sensor - Eagle Eye

MS14A

Qty: 1 - 4
US $27.11 EA

Qty: 5 - 9
US $25.75 EA

Qty: 10 +
US $24.41 EA

The EagleEye Motion Sensor sends wireless Radio Frequency (RF) signals to an X10 Transceiver or any X10 security system base receiver. The Transceiver receives the signals from the Motion Sensor and passes them onto your house wiring. These signals are then received by X10 lamp, appliance, or wall switch modules to control lights (or appliances) around the home. If you set the EagleEye Motion Sensor to a unique code (House Code A and Unit Code 1), then walk into the room where the EagleEye Motion Sensor is located, a lamp module set to "A1" will turn on. As long as you keep moving, the light will stay on, and when you stop moving, the light turns off after the amount of time you select (1-255min). The signals transmitted onto your house wiring can also be received by the two-way Computer Interface (CM11A) to initiate macros. The Computer Interface then performs a sequence of events that you've set it up to do.

Up to 20ft range
Passive infrared technology
Motion Sensor is 2.5 x 2.5 inches
Easily disable the dawn/dusk feature so it will work 24 hours/day!
Weather resistant case protects the sensor from the elements
Locking screw prevents easy removal of batteries
Requires 2 AAA batteries (not included)

www.rpelectronics.com
Monday, December 01, 2008
9:07:03 AM

Tel: (604) 738-6722
Specifications & prices subject
to change without notice.