MS13A : Motion Sensor

Security: X-10 Security

Motion Sensor - Hawkeye II

MS13A

Qty: 1 - 2
US $28.08 EA

Qty: 3 - 4
US $26.68 EA

Qty: 5 +
US $25.28 EA

The Hawkeye II Motion Sensor (MS13A) sends wireless Radio Frequency (RF) signals to an X10 Transceiver or any X10 security system base receiver. The Transceiver receives the signals from the Motion Sensor and passes them onto your house wiring. These signals are then received by X10 lamp, appliance, or wall switch modules to control lights (or appliances) around the home.
If you set the Hawkeye II Motion Sensor to a unique code (Housecode A and Unit Code 1), then walk into the room where the Hawkeye II Motion Sensor is located, a lamp module set to "A1" will turn on. As long as you keep moving, the light will stay on, and when you stop moving, the light turns off after the amount of time you select. The signals transmitted onto your house wiring can also be received by the CM11A two-way Computer Interface (included with ActiveHome) to initiate macros. Built in photocell works like a watchful eye and will turn lights on and off at dusk and sunrise. This will save you energy as it only detects motion in the dark.

Activates X-10 modules
Up to 20ft range
Motion Sensor is 2.5 x 2.5 inches

www.rpelectronics.com
Monday, December 01, 2008
10:41:18 AM

Tel: (604) 738-6722
Specifications & prices subject
to change without notice.