Microcontroller Products: Parallax
  Tri-Axis Accelerometer  
H48C-HITACHI Qty: 1 - 4
US $55.78 EA 		Qty: 5 - 9
US $52.98 EA 		Qty: 10 +
US $51.88 EA
The Hitachi H48C Tri-Axis Accelerometer is an integrated module that can sense gravitational (g) force of ¦3g on three axes (X, Y, and Z). The module contains an onboard regulator to provide 3.3-volt power to the H48C, analog signal conditioning, and an MCP3204 (four channel, 12-bit) analog-to-digital converter to read the H48C voltage outputs. All components are mounted on a 0.7 by 0.8 inch module. Acquiring measurements from the module is simplified through a synchronous serial interface. With the BASIC Stamp¿ series, for example, this is easily handled with the SHIFTOUT and SHIFTIN commands.

We do not recommend using this module with a breadboard. The design has fairly short pins with components on both the top and bottom of the module. A permanent mounting location on a through-hole board like the Parallax Super Carrier Board is the only mounting solution we support for the Hitachi H48C Tri-Axis Accelerometer.



H48C-HITACHI : Tri-Axis Accelerometer
    
   
 



RP Electronic Components Ltd.
All rights reserved. © 2008

www.rpelectronics.com
Monday, October 06, 2008
10:33:46 PM

Tel: (604) 738-6722
Specifications & prices subject 
to change without notice.